登录 / 注册
近似与非系统的平均功耗有助于确定与非设备功耗在系统功率预算中的作用,以及如何优化与非操作的预算. 该工具提供了与非读写程序-擦除-空闲-待机工作负载下每个主机通道的与非电流/功耗和系统与非功耗的估计.
本计算器的受众是了解所使用的与非设备并希望估计与非功耗的用户, type of 与非 操作 used, 以及它们各自的当前(Icc)规范. 本计算器的用户应了解系统的物理和操作特性,如(但不限于)与非主机数据输入/输出接口速度, 系统 parallel use of the 与非 LUNs/die, voltage supply levels to the 与非, 与非 Read-程序-擦除-Idle-Standby workloads, 电路板走线-控制器DQ总线-和其他物理系统元件的电容.
Enter a value for each item
This value should be either 1 or 2
中使用的值不应大于
'Number of 与非 LUNs/die per host channel' row
中使用的值不应大于
'Number of 与非 LUNs/die per host channel' row
中使用的值不应大于
'Number of 与非 LUNs/die per host channel' row
中使用的值不应大于
'Number of 与非 LUNs/die per host channel' row
This value should be either 1 or 2
结果
Total 与非 Power for all host channels
(W)
了解更多
这个总数假设每个与非主机通道在使用主机通道上所有与非芯片的相同工作负载百分比条件下执行相同的与非操作
roughtly equally.
Must add up to 100%
与非 系统 current per channel (in mA)
与非 系统 power per channel (W)
与非 Vcc power rail during 与非 array
操作
与非 Vccq power rail during 与非 array
操作
与非 Vcc power rail during data output
与非 Vccq power rail during data output
了解更多
适用于与非 NV-DDR / NV-DDR2 / NV-DDR3型号的操作, 假定使用与非互补信号. This value is calculated form the equation:
Current = 1/2 * # *输出频率* Vccq *电容负载
功率= 1/2 *开关信号# *输出频率* Vccq * Vccq *电容负载
Current = 1/2 * # *输出频率* Vccq *电容负载
功率= 1/2 *开关信号# *输出频率* Vccq * Vccq *电容负载
与非 Vpp power rail during array
操作 (if used)
与非 系统 current per channel (in mA)
与非 系统 power per channel (W)
与非 Vcc power rail during 与非 array
操作
与非 Vccq power rail during 与非 array
操作
与非 Vcc power rail during data output
与非 Vccq power rail during data output
了解更多
适用于与非 NV-DDR / NV-DDR2 / NV-DDR3型号的操作, 假定使用与非互补信号. This value is calculated form the equation:
Current = 1/2 * # of switching 信号*输出频率* Vccq *电容负载
功率= 1/2 *开关信号# *输出频率* Vccq * Vccq *电容负载
Current = 1/2 * # of switching 信号*输出频率* Vccq *电容负载
功率= 1/2 *开关信号# *输出频率* Vccq * Vccq *电容负载
与非 Vpp power rail during array
操作 (if used)
与非 系统 current per channel (in mA)
与非 系统 power per channel (W)
与非 Vcc power rail during 与非 array
操作
与非 Vccq power rail during 与非 array
操作
与非 Vcc power rail during data input
与非 Vccq power rail during data input
与非 Vpp power rail during array
操作 (if used)
与非 系统 current per channel (in mA)
与非 系统 power per channel (W)
与非 Vcc power rail during 与非 array
操作
与非 Vccq power rail during 与非 array
操作
与非 Vpp power rail during array
操作 (if used)